Dwell Breeze Ceiling Integrated Cooling Fan
Breeze Ceiling Integrated Fan – Perfect for Kitchens & Bathrooms
- Strong and stable airflow that doesn’t disturb stove flames
- Premium engineering plastic panel – no yellowing over time
- Easy to install in both integrated and standard ceilings
- Ideal for keeping your bathroom fresh, stylish.
| Size: 4 Inch (100 mm) |
| Parameter | Value (mm) |
| A | 300 |
| B | 11 |
| C | 112 |
| D | 267 |
| E | 292 |
Application
1. Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
2. Ventilation shaft mounting or duct connection.
3. Low to medium air flow motion for short distances at low air resistance.
4. Compatible with Ø 100-, 120-, 125- and 150-mm air ducts
Design
1. Modern design and aesthetic look.
2. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
3. Various decorative plates for the front panel of the natural aluminum.
4. The intellectual impeller design makes the fan efficiency high and the service lifelong.
5. Protection rating IP34.
Mounting
1. The fan is mounted directly into the ventilation shaft.
2. In case of remote location of the ventilation shaft flexible air ducts may be used. The air duct is connected to the fan exhaust flange through a clamp.
3. Fixed to the wall by means of screws.
4. Suitable for ceiling mounting.
5. To connect a fan with a 12 V low voltage motor to 220 V/50 Hz power mains, it is necessary to purchase a step-down transformer (e.g. the TRF 220/12-25 transformer)
Motor
1. Reliable and low-watt electric motor.
2. Designed for continuous operation and requires no maintenance.
3. Equipped with overheating protection.
Speed Control
Manual:
1. The fan is controlled by a room light switch. It is not included in the delivery set.
2. The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
3. Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may be connected to the same controller. Speed controllers can not be connected to the fans with Т, ТН, ТР, VТ, VТН modifications.
Automatic:
1. By the BU-1-60 electronic control unit. The control unit is supplied separately.
2. By the T timer (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
3. By the humidity sensor and the TH timer (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90 % the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
Parameter | Value |
Ø D | 100mm |
B | 152mm |
H | 120mm |
L | 126mm |
L1 | 130mm |
Application
1. Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
2. Ventilation shaft mounting or duct connection.
3. Low to medium air flow motion for short distances at low air resistance.
4. Compatible with Ø 100-, 120-, 125- and 150-mm air ducts
Design
1. Modern design and aesthetic look.
2. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
3. Various decorative plates for the front panel of the natural aluminum.
4. The intellectual impeller design makes the fan efficiency high and the service lifelong.
5. Protection rating IP34.
Mounting
1. The fan is mounted directly into the ventilation shaft.
2. In case of remote location of the ventilation shaft flexible air ducts may be used. The air duct is connected to the fan exhaust flange through a clamp.
3. Fixed to the wall by means of screws.
4. Suitable for ceiling mounting.
5. To connect a fan with a 12 V low voltage motor to 220 V/50 Hz power mains, it is necessary to purchase a step-down transformer (e.g. the TRF 220/12-25 transformer)
Motor
1. Reliable and low-watt electric motor.
2. Designed for continuous operation and requires no maintenance.
3. Equipped with overheating protection.
Speed Control
Manual:
1. The fan is controlled by a room light switch. It is not included in the delivery set.
2. The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
3. Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may be connected to the same controller. Speed controllers can not be connected to the fans with Т, ТН, ТР, VТ, VТН modifications.
Automatic:
1. By the BU-1-60 electronic control unit. The control unit is supplied separately.
2. By the T timer (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
3. By the humidity sensor and the TH timer (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90 % the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
Application
1. Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
2. Ventilation shaft mounting or duct connection.
3. Low to medium air flow motion for short distances at low air resistance.
4. Compatible with Ø 100-, 120-, 125- and 150-mm air ducts
Design
1. Modern design and aesthetic look.
2. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
3. Various decorative plates for the front panel of the natural aluminum.
4. The intellectual impeller design makes the fan efficiency high and the service lifelong.
5. Protection rating IP34.
Mounting
1. The fan is mounted directly into the ventilation shaft.
2. In case of remote location of the ventilation shaft flexible air ducts may be used. The air duct is connected to the fan exhaust flange through a clamp.
3. Fixed to the wall by means of screws.
4. Suitable for ceiling mounting.
5. To connect a fan with a 12 V low voltage motor to 220 V/50 Hz power mains, it is necessary to purchase a step-down transformer (e.g. the TRF 220/12-25 transformer)
Motor
1. Reliable and low-watt electric motor.
2. Designed for continuous operation and requires no maintenance.
3. Equipped with overheating protection.
Speed Control
Manual:
1. The fan is controlled by a room light switch. It is not included in the delivery set.
2. The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
3. Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may be connected to the same controller. Speed controllers can not be connected to the fans with Т, ТН, ТР, VТ, VТН modifications.
Automatic:
1. By the BU-1-60 electronic control unit. The control unit is supplied separately.
2. By the T timer (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
3. By the humidity sensor and the TH timer (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90 % the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
Ceiling Fan that disappears into design.
Dwell Breeze is a ceiling-integrated fan designed for bathrooms, dressing areas, and premium interior spaces where air movement should remain silent, minimal, and architecturally clean. Its cassette-style design blends into the ceiling while creating a bladeless look and gentle everyday comfort for compact spaces.
True ceiling-integrated design
Breeze sits flush within the ceiling and keeps the room visually clean without a traditional exposed fan.
NMB Japan Ball Bearing Motor
Supports smooth, quiet operation and long service life for regular daily use.
Bladeless look, gentle comfort
Creates air movement with a refined cassette appearance, making the ceiling feel cleaner and more premium.
Made for compact bathrooms
Well suited for smaller bathrooms and dressing areas where a standard ceiling or wall fan feels bulky or noisy.
Designing a premium bathroom or interior space?
Talk to Dwell Air for Breeze selection and ceiling ventilation planning.
Breeze is ideal for bathrooms, dressing rooms, powder rooms, premium residential interiors, hotel bathrooms, and other small spaces where silent ceiling air movement is preferred over traditional noisy fans.
Minimal ceiling comfort for smaller spaces.
Breeze is designed for interiors where you want the visual cleanliness of a cassette panel and the comfort of quiet air movement without the look or feel of a conventional fan.
Breeze operates from within the false ceiling and creates gentle, consistent air movement in the room. Instead of using a traditional visible fan, it delivers a cleaner, cassette-style presence that supports everyday comfort while preserving a refined ceiling design.
The unit sits concealed above the ceiling line
The visible surface remains a clean cassette panel, keeping the space visually minimal.
The motor drives quiet air movement
Breeze uses its NMB Japan Ball Bearing Motor to create steady everyday airflow without the harsh character of traditional noisy fans.
The room feels more comfortable
The fan helps support air movement and everyday comfort in compact bathrooms and dressing areas.
The architecture stays clean
The result is a bladeless-look ceiling solution that feels more integrated with premium interiors.
Live page specification values for Breeze 100 planning and selection.
Use the dimension image and live dimension values for panel and installation coordination.
Core questions around usage, design fit, and ceiling installation.
Access product catalog, installation manual, and CAD file for Breeze.
Breeze product catalog
Product overview and technical presentation for the Breeze ceiling-integrated fan.
Download catalogBreeze installation manual
Manual for product handling, setup, and installation coordination.
Download manualBreeze CAD file
Drawing file for false-ceiling coordination and installation detailing.
Open CAD fileCeiling Fan that disappears into design.
Dwell Breeze is a ceiling-integrated fan designed for bathrooms, dressing areas, and premium interior spaces where air movement should remain silent, minimal, and architecturally clean. Its cassette-style design blends into the ceiling while creating a bladeless look and gentle everyday comfort for compact spaces.
True ceiling-integrated design
Breeze sits flush within the ceiling and keeps the room visually clean without a traditional exposed fan.
NMB Japan Ball Bearing Motor
Supports smooth, quiet operation and long service life for regular daily use.
Bladeless look, gentle comfort
Creates air movement with a refined cassette appearance, making the ceiling feel cleaner and more premium.
Made for compact bathrooms
Well suited for smaller bathrooms and dressing areas where a standard ceiling or wall fan feels bulky or noisy.
Designing a premium bathroom or interior space?
Talk to Dwell Air for Breeze selection and ceiling ventilation planning.
Breeze is ideal for bathrooms, dressing rooms, powder rooms, premium residential interiors, hotel bathrooms, and other small spaces where silent ceiling air movement is preferred over traditional noisy fans.
Minimal ceiling comfort for smaller spaces.
Breeze is designed for interiors where you want the visual cleanliness of a cassette panel and the comfort of quiet air movement without the look or feel of a conventional fan.
Breeze operates from within the false ceiling and creates gentle, consistent air movement in the room. Instead of using a traditional visible fan, it delivers a cleaner, cassette-style presence that supports everyday comfort while preserving a refined ceiling design.
The unit sits concealed above the ceiling line
The visible surface remains a clean cassette panel, keeping the space visually minimal.
The motor drives quiet air movement
Breeze uses its NMB Japan Ball Bearing Motor to create steady everyday airflow without the harsh character of traditional noisy fans.
The room feels more comfortable
The fan helps support air movement and everyday comfort in compact bathrooms and dressing areas.
The architecture stays clean
The result is a bladeless-look ceiling solution that feels more integrated with premium interiors.
Live page specification values for Breeze 100 planning and selection.
Use the dimension image and live dimension values for panel and installation coordination.
Core questions around usage, design fit, and ceiling installation.
Access product catalog, installation manual, and CAD file for Breeze.
Breeze product catalog
Product overview and technical presentation for the Breeze ceiling-integrated fan.
Download catalogBreeze installation manual
Manual for product handling, setup, and installation coordination.
Download manualBreeze CAD file
Drawing file for false-ceiling coordination and installation detailing.
Open CAD file